Featured Products

GeoComfort Geothermal Systems
As always, the GeoComfort name is synonymous with efficiency and comfort for your family. The Compass Series won’t disappoint. The units provide the ultimate level of comfort in all weather conditions, are three to four times as efficient as the most efficient conventional system and operate at a fraction of the cost.

4811.png
Verve Thermostat
By applying energy-harvesting, radio frequency technologies to heating and cooling controls (HVAC) the Verve thermostat enables wireless temperature control. Designed with energy savings in mind, the Verve thermostat integrates with the Verve lighting control systems for single switch control of lights, receptacle and temperature to activate either a whole house economy mode or comfort mode with one click of a Verve switch.

4273.png
AMVIC ICF (Insulated Concrete Forms)
Cost effective, sustainable and environmentally friendly, Insulated Concrete Forms (ICF) construction is a superior way to build; and no one makes better ICFs than Amvic. We offer the highest quality products, and first-rate support. Whether you are an owner, builder, or architect, find out why your next project should be built with Amvic ICF.

4276.png
Verve Thermostat
By applying energy-harvesting, radio frequency technologies to heating and cooling controls (HVAC) the Verve thermostat enables wireless temperature control. Designed with energy savings in mind, the Verve thermostat integrates with the Verve lighting control systems for single switch control of lights, receptacle and temperature to activate either a whole house economy mode or comfort mode with one click of a Verve switch.

4273.png
Verve Wireless Switches
Unlike conventional switches, Verve switches utilize energy harvesting, radio frequency technologies to control lighting, receptacles and temperature. The simple act of turning a switch on or off generates enough energy to transmit radio signals to the 10-channel controller across distances as great as 300 feet. Because each switch generates its own power, Verve switches are completely wireless and battery-less. Every Verve switch operates as a dimmer and can be mounted or moved virtually anywhere.

4271.png
Allows for High Volume Hot Water
In varius pellentesque vestibulum. Donec tempor volutpat dolor in sodales. Nullam ullamcorper, arcu in hendrerit pretium, sem lectus fringilla nisl, nec porttitor massa IOWA nec risus. Vestibulum purus lorem, varius sed semper nec, egestas at est. Vivamus purus nibh, ornare blandit dapibus non, consectetur eu sem. Integer commodo tortor sit amet nulla feugiat congue. Nulla facilisi. Nullam odio felis, tempor eu tempus id, tincidunt quis eros.

5037.png
KleenRunner™
KleenRunner is made of the same thin, tear resistant and skid resistant material as KleenWrap. KleenRunner is printed with lines running the entire length of the roll to make it very convenient to cut it to the exact width to protect hallways or other areas where a runner is needed.

4223.png
The Green Building Handbook
The Green Building Handbook is the ultimate green building resource guide for built environment professionals, carrying critical information on the latest techniques, trends, technologies and materials in the green building movement and featuring profiles of the most innovative products and services available in the region.

4288.png
RetroFAST® Septic System Enhancement
Conventional septic systems utilize a septic tank to hold non-soluble materials and a soil absorption component (leach fields, for example) to provide the majority of treatment and disperse the wastewater.

4589.png
Building Green
We've built up a library of green details and opportunities to make your house as healthy, energy efficient, and sustainable as possible.

4192.png
SilveRboard Rigid Foam Insulation
SilveRboard Rigid Foam Insulation is a high performance flat-sheet insulation material made from Expanded Polystyrene (EPS) which is coated with a layer of BASF reflective lamination on both sides. This highly effective combination of materials offers a higher r-value per inch compared to traditional flat-sheet insulation as well as provides built-in moisture and air barriers which eliminate the need for house wrap.

4278.png
Verve Thermostat
By applying energy-harvesting, radio frequency technologies to heating and cooling controls (HVAC) the Verve thermostat enables wireless temperature control. Designed with energy savings in mind, the Verve thermostat integrates with the Verve lighting control systems for single switch control of lights, receptacle and temperature to activate either a whole house economy mode or comfort mode with one click of a Verve switch.

4273.png
GeoComfort Geothermal Systems
As always, the GeoComfort name is synonymous with efficiency and comfort for your family. The Compass Series won’t disappoint. The units provide the ultimate level of comfort in all weather conditions, are three to four times as efficient as the most efficient conventional system and operate at a fraction of the cost.

4811.png
The Designed Exterior by Ply Gem
Ply Gem's solution–based product lines enable architects, builders and remodelers to meet virtually any project requirement. Their brands offer cutting edge features  from severe weather protection to options that feature Energy Star® qualified foam insulation.

4846.png
KleenWrap™
Consider the many benefits the simple installation of a disposable floor protection product provides. As soon as the deck surface is complete or the concrete is cured, cover the entire surface with a KleenWrap disposable floor protection product.

4221.png
Verve Vacancy Sensor
The Verve Vacancy Sensor makes additional energy savings possible by automatically shutting off lights in unoccupied areas. The Verve sensor combines photovoltaic and radio frequency technologies for wireless and battery-less operation. This distinctive design makes installation easier and virtually maintenance free.

4272.png
Verve Wireless Switches
Unlike conventional switches, Verve switches utilize energy harvesting, radio frequency technologies to control lighting, receptacles and temperature. The simple act of turning a switch on or off generates enough energy to transmit radio signals to the 10-channel controller across distances as great as 300 feet. Because each switch generates its own power, Verve switches are completely wireless and battery-less. Every Verve switch operates as a dimmer and can be mounted or moved virtually anywhere.

4271.png
Verve 10 Channel Controller
The Verve 10-channel controller is designed for quick and easy programming of receptacles and wide variety of lighting functions that range form on/off and timing to pathways and scenes. Each Verve controller is hardwired to line voltage and controls up to 10 light, fan and receptacle loads.

4268.png
Verve Hallway Sensor
The Verve hallway occupancy sensor combines occupancy sensing technology with energy-harvesting radio frequency technology to automatically turn OFF or reduce lighting in a hallway when it is unoccupied and to automatically turn ON the lights when someone enters the hallway.

4275.png
Verve 10 Channel Controller
The Verve 10-channel controller is designed for quick and easy programming of receptacles and wide variety of lighting functions that range form on/off and timing to pathways and scenes. Each Verve controller is hardwired to line voltage and controls up to 10 light, fan and receptacle loads.

4268.png