KleenWrap can be made available in varying widths. For most applications it will be delivered to your job site in a 5' x 250' roll.
Once the foundation is capped, the material is cut to length and the ends and the edge of the material is stapled to the band board or to the deck.
Subsequent strips are cut to length, overlapped, aligned and the overlapped edge sealed using KleenWrap Tape. Installation Instructions are provided here for both the Breathable and the Non-Perforated. (provided in Adobe pdf format)
Exterior and interior walls can be built right on top of the material. When construction is complete and ready for painting or finish flooring, a utility knife is run along all walls and the KleenWrap can be easily pulled up leaving the OSB or plywood cleaner than has ever been possible before.
A quick vacuum and you have clean and virtually brand new subfloors ready for finish flooring.
KleenWrap can be used to cover stairs, concrete floors in garages, and any concrete slab to protect them from the same construction site contamination that wood surfaces are subject to. Because the material breathes, concrete can continue to cure and moisture will not be trapped underneath it.
KleenWrap can be applied as a second or even third layer over KleenWrap protected floors. This is particularly advantageous in longer term projects and when it is desirable to remove a top layer to significantly reduce the amount of dust and dirt before interior staining and painting.
KleenWrap can also be used to cover any large tears that may occur in the material due to normal construction activity, particularly during longer term projects like Institutional or Industrial construction. A piece of material is cut to cover the damaged area and the edges are secured with KleenWrap Tape.
Exterior and interior walls can be built right on top of the material. When construction is complete and ready for painting or finish flooring, a utility knife is run along all walls and the KleenWrap SAE can be easily pulled up leaving the subfloors cleaner than was ever possible before.
KleenRunner is made of the same thin, tear resistant and skid resistant material as KleenWrap. KleenRunner is printed with lines running the entire length of the roll to make it very convenient to cut it to the exact width to protect hallways or other areas where a runner is needed.
During his sales and marketing career in the insurance business, Gary was fascinated with the construction business and spent untold off hours visiting jobsites. It was obvious how much filth was remaining on the typical jobsite.
When he retired from insurance he developed and launched recyclable and reusable protective products specifically aimed at subfloors. He is now a passionate advocate for the importance and benefits of cleanliness for homeowners, builders and contractors.