Know Your Building Science Climate Zone
Knowing the climate zone your residential build will take place in will influence many of the decisions you will make as to construction methods and building materials. As energy conservation becomes a growing concern, building to your climate zone is an excellent way to ensure that you are providing your clients with the best options. Keep in mind that building and energy codes are the minimum standard.
Of course the climate has an impact on the energy consumption of residential homes and while building codes and energy conservation incentives work to provide you with guidelines as to what works in your area, it is ultimately up to designers and builders to ensure that the home is as efficient as it can be.
Up until 2004, there were conflicting climate zones maps with different designations. For example the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) used a map with 38 climate zones for 240 cities while the International Energy Conservation Code (IECC) used a map with 33 climate designations based on county lines.
It was only with the creation of the U.S. Department of Energy Pacific Northwest National Laboratory’s map of U.S. climate zones that a universal standard was established. The map is based on an analysis of the 4,775 U.S. weather sites utilized by the National Oceanic and Atmospheric Administration. From the US Department of Energy: “This PNNL developed map divided the United States into eight temperature-oriented climate zones. These zones are further divided into three moisture regimes designated A, B, and C. Thus, the IECC map allows for up to 24 potential climate designations. The new climate zones were set along county boundaries, making it easier for builders to determine what climate zone applied to a specific building.”
The climate zones are based on moisture and temperature and range from 1 for the hottest regions (the southernmost tip of Florida) to 8 (those parts in Alaska which experience the coldest temperatures).
The calculations are based on degree days which are a combination of time and the temperature difference below some base temperatures. You can get a comprehensive explanation of heating and cooling degree days here.
Here is a table showing the number of heating degree days or cooling degree days for each climate zone designation.
Building climate zones are also based on moisture and the three categories are created as follows:
Moist (A). If you see the letter “A” after the climate zone number, then your build falls into this moisture category. This designation is based on high rainfall and the area must lie outside of the marine climate zone.
Dry (B). This is calculated with the rainfall and annual average temperature. The calculation is 0.44 x (TF – 19.5), where TF is the annual mean temperature in degrees Fahrenheit
Marine (C). These temperatures are neither too hot nor too cold (warmest month average temperature should be below 72° F). It must have four months with mean temperatures above 50° F with summer as the dry season.
Read more about your building science climate zone here.
This blog was developed by Norbord. All posts, sponsored and un-sponsored have been reviewed and approved by the Sustainable Community Media Editorial Team to ensure quality, relevance/usefulness and objectivity.
Topics: Building Green
Companies: Norbord, Inc.
Doug McNeill Dougs 39 years in the forest products industry has provide a broad understanding of multiple aspects of the industry. He spent 7 years in national builder sales and industrial sales before joining Norbord Building Materials in 1980. His 7 years in Pro Dealers sales led to 8 years as branch manager in several distribution centers across the country, 1 year as National Account manager, and 2 years as operations manager before moving to Norbord Inc as Export OSB Sales Manager.