How does Aeroseal duct sealing work?
Aeroseal is a patented breakthrough technology that tackles duct leaks from the inside out. The Aeroseal process puts escaping air under pressure and causes polymer particles to stick first to the edges of a leak, then to each other until the leak is completely sealed.
1. Prepare Your System
Plugging your registers with foam forces the air in your duct work to escape through leaks. By forcing air to escape through leaks we are able to pretest your duct system and begin the duct sealing process.
A small access hole is cut into the supply or return and a temporary collar is attached. The air conditioning indoor coil, fan, and furnace are temporarily blocked with a foam plug to prevent sealant particles from entering this part of your system.
The next step of the process is to pretest and inject non-toxic sealant into your duct work. The pretest measures exactly how much duct leakage your system has in square inches and also calculates just how much air is escaping through leaks in your duct work.
2. Pretest Your Ductwork
Once the system is properly prepped the Aeroseal machine is connected to the duct work using lay flat tubing.
The Air Duct Diagnostic pretest will detect the exact amount of duct leakage in the duct system – the typical duct leakage detected in a home is between 30-40%.
Next, the non-toxic, UL tested and approved, aerosol sealant is injected into your duct system. As the sealant exits your ductwork through leaks it begins to collect on the edge of the hole until the leak is completely sealed. Aeroseal can seal leaks up to 5/8ths of an inch.
3. Seal Your Ductwork
Small aerosol particles are injected and kept suspended in the airflow by continuous air movement.
The aerosol particles begin collecting on the edges of holes and cracks in your duct work and seal your leaky duct work from the inside. This entire process is computer controlled where you can monitor the results in real time showing you just how effective the Aeroseal process is. Ducts are sealed with only 1 to 2 oz. of sealant material.
3. Review Your Results
A computer generated analysis summarizes your home’s duct leakage reduction providing you with verification of the success of the Aeroseal application.
Once the process is complete your certified Aeroseal technician will provide you with a printed certificate summarizing your results.
4. Review Your Results
Now that you’ve had your ductwork sealed with Aeroseal you can expect to experience increased home comfort, improved indoor air quality, and lower energy bills!
|Visit the Company Website|
Products and Services
|Aeroseal is a patented breakthrough technology that tackles duct leaks from the inside out. The Aeroseal process puts escaping air under pressure and causes polymer particles to stick first to the edges of a leak, then to each other until the leak is completely sealed. Learn more »|